FuG Elektronik GmbH, Am Eschengrund 11, 83135 Schechen, GERMANY

Products

All standard power supplies of FuG Elektronik GmbH deliver highly stabilized DC voltage resp. DC current. The values of voltage and current can be set from zero up to the maximum nominal value. Variations of the mains voltage or of the load will be regulated  automatically. The outputs are protected against short circuit and flash over. Depending on the connected load, the power supplies can work in constant voltage mode (voltage source) or constant current mode (current source) with automatic switch over. Ohmic, capacitive, inductive or complex kinds of load are possible. The output values can be adjusted by means of ten-turn potentiometers at the front plate (not for cassette power supplies) or optionally via analog or digital interfaces. 

Please select the power supply family you are interested in by pressing one of the buttons at the left.
The matrix below gives a fast overview over the power supply families and type ranges made by FuG Elektronik GmbH.
Using our V / I- map you can make a fast pre-selection by voltage and current. 
In case you don't find what you need, searching our standard products, please send us simply your technical specification. We will be glad to offer your customer specific power supply (samples).


Power supply selection matrix

Note: When choosing a power supply, please ensure that you are aware of the meaning of all the relevant terms used in the data sheet. If in doubt, please refer to 'Terms used in the definition & specification of FuG power supplies'

to top of the page

 Power supply family Power supply type range Principle Maximum & Minimum ratings for each power supply type range
Vmin
Volts
Vmax
Volts
Imin
Amps
Imax
Amps
Pmin
Watts
Pmax
Watts
Emin
J/s
Emax
J/s
  • Low voltage power supplies 
    (floating output)
NTN
6.5 350 0.5 4000 35 100000    
NYN
12.5 350 20 4000 7000 100000    
NCN 32 55 22,5 180 1250 5000    
  • Autoranging power supplies
    (float. outp. for < 3000 V)
NCA 55 55 40 160 750 3000    
MCA 150 3000 0.75 180 750 9000    
  • Medium voltage power supplies
    (floating output)
MCP
125 2000 0.006 120 14 15000    
MYN
650 2000 3 100 7000 70000    
  • High voltage power supplies

 

HCP 3500 150000 0.0005 4.5 14 15000    
HCH 650 200000 0.0015 75 350 50000    
HYN 3500 20000 0.3 20 7000 70000    
  • High voltage cassette power supplies
HCE 125 35000 0.0002 2.5 7 350    
HCN 7E 125 35000 0.0002 0.05 7 7    
  • Capacitor charging, high voltage, power supplies
HCK 2000 65000 0.003 20     100 20000
  • Superconductor power supplies
NTS   65 10000          
  • Linear power supplies Bipolar & Unipolar,
    High voltage bipolar power supplies
NLN
(linear with unipolar output)
6.5 500 0.06 120 35 1400    
NLB
(linear with bipolar output)
± 6.5 ± 350 ± 0.1 ± 120 35 1400    
HCB
(High voltage bipolar output - capable of continuous zero crossing)
± 1250 ± 20000 ± 0.001 ± 0.01 1.4 200    
  • Custom power supplies
Typical examples To customer specification. Please contact us with details of your application

Note: Computer interfaces of our PROBUS V system and/or analog programming options are available for all FuG power supplies (built-in or as add-on).


If you were searching for Power supplies of the type ranges MCN, MCL, HCN or HCL: This type ranges are not longer manufactured now.

You can still download the appropriate data sheets here: MCL and MCN    HCL and HCN

For all expired product ranges we grant technical service without time limit.

Look Chapter Accessories for isolating transformers, rack adapters, cables and connectors.